Toilet partition is applicable to public buildings and commercial buildings, which means that the toilet is partitioned into independent spaces with baffles. Special areas with high requirements for partition surfaces (such as chemical and food industries) are not included. The following is a detailed introduction to the methods of Jinan toilet partition plate acceptance.
1. First, check whether the arrived plate is the one agreed with the merchant. For example, anti magnification plates have different qualities.
2. Look at the appearance of the plate to see if there is any bruise, scratch, edge explosion, corner collision, etc.
2. Check whether there is chromatic aberration in the whole set of plates. Generally speaking, chromatic aberration of partition plates rarely exists, but it is still necessary to check for unnecessary trouble in the future. After all, once the partition is installed, it is troublesome to find problems and negotiate again.
3. Check whether the plate is flat and whether there is edge warping.
4. Check whether the accessories are the same as required and confirm whether the number is consistent.
In addition, when designing, it should be noted that it is inevitable that the compartment will have a bad smell. If these unpleasant gases can not be discharged in time, the air quality in the toilet partition will be seriously affected, thereby adversely affecting the user's respiratory system. Therefore, it is necessary to take ventilation measures for public toilet compartments.
Natural ventilation through windows is not enough. In addition, we need to install toilet exhaust fans to increase indoor air circulation. When designing public toilet partitions, exhaust fans are usually installed on the top or side to form an air flow for those unpleasant gases to be discharged outdoors together. The ventilation rate of the exhaust fan shall be at least three times per hour to ensure that the ventilation rate of each toilet is not less than 40m3 / h.
This article introduces in detail the methods of checking and accepting the quality of toilet partition plates, hoping to help you! Only by solving the above problems can we buy partitions that meet our own requirements and avoid being deceived. If you want to know more about toilet partition boards, please pay attention to our website http://www.jnndjc.com Come on!